Technical Tinkering

Technical Tinkering

What to find here...

In this blog I'll try to keep you posted on the progress of my current projects. They are mainly of a technical nature like Electronics, CNC machining, Amateur Radio etc. Come in and look around!
I welcome your comment, which you can insert by clicking on 'Comments(.)' at the bottom of the page.

Isolated PWM output

EmbeddedPosted by michael Jul 25, 2017 01:52:11
Facing the challenge of making an isolated DAC output I found a circuit by Kerry Wong ( Unfortunately, it did not work as I hoped. The optocoupler I used, a PC817 turned out to be too slow. It took some 20 us for the transistor to get out of saturation. After replacing the coupler with a 6N135, speed was no longer a problem, however I did not quite like the 50% threshold level of the first opamp. So, I changed that to an 'automatical averager'. This worked OK, except for low duty cycles, the output would not go low enough. Adding a little feed-forward on the automatic threshold did the trick. Now the output voltage is nicely linear (from 0 to 5V) with the input duty cycle. Thanks to Kerry for the inspiration!

  • Comments(0)//